Renault Kangoo Driver's Manual
Bonnet
In this manual: Renault Kangoo Driver's Manual
~1min read

To open, pull handle 1, located on the left side of the dashboard.
! Deactivate the Stop and Start function before any work in the engine compartment.Bonnet safety catch

Bonnet safety release
Lift the bonnet a few centimetres and push lever 2 to the left.
! When working near the engine, it may be hot. In addition, the cooling fan may start at any time. Risk of injury.Hood release

Opening the bonnet
Lift the bonnet fully, then unclip prop rod 4 from its clip 5 and, for your safety, be sure to place it in location 3.
Make sure it is securely in place.
! After any impact, even a slight one, against the grille or bonnet, have the bonnet latch checked as soon as possible by a brand representative.Closing the hood

Closing the bonnet
Check that nothing has been left in the engine compartment.
Release prop rod 4 and return it to its clip 5.
Lower the bonnet and release it when it is 20 cm from the closed position. It latches by itself under its own weight.
! Make sure the bonnet is properly latched. Make sure nothing interferes with the latch mechanism (gravel, rag...). ! After any work in the engine compartment, make sure nothing has been left behind (rag, tools...). These may damage the engine or cause a fire.Test yourself
A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?