Rear quarter panel

INTRODUCTION

Replacing this part is a basic operation for a rear side impact.

In the operation described below, you will only find descriptions of the joints specific to the part concerned.

Information on other parts is covered in their respective sections.

For the panel van version, this part can be replaced in two ways (see sections in the drawing below):

1. 1

   - complete with section A.A

2. 2

   - partial, section B.B

The particularities of the glazed version and the version with girafon are given at the end of the chapter.

PART COMPOSITION M.P.R.

Assembly with sliding door rail housings and striker bracket.

LIST OF LINKS:

Side panel gutter, tail light bracket
Body side inner panel
Centre pillar reinforcement

PARTS CONCERNED (thickness in mm):

1. 1

   Rear quarter panel (right side) 0.8

2. 2

   Rear quarter panel inner (right side) 0.7

3. 3

   Side panel gutter, tail light bracket 1.2

4. 4

   Rear quarter panel extension 1

5. 5

   Side panel gutter upper reinforcement 1.2

6. 6

   Centre rail bracket 1

7. 7

   Cross member inner panel 0.7

8. 8

   Roof panel 0.7

9. 9

   Centre pillar upper reinforcement 1.2

10. 10

    Centre pillar reinforcement 1.2

11. 11

    Rear sill closing panel 1.5

12. 12

    Seatbelt anchorage reinforcement 1.2

13. 13

    Girafon gutter 0.7

    

    

    

    

    

    

    

    

    

    

    

    

    

    

    

    

    

    

    

    

    

    

    

    

    

    

    

    

    

    

    

    

    

GLAZED VERSION

VERSION WITH GIRAFON

INTRODUCTION

The specific features for vehicles fitted with a girafon are given below.