Electrical equipment

Interior light

~1min read

REMOVAL - REFITTING OF THE DOME LAMP

Remove the light diffuser by levering it out with a small screwdriver at the two points (A).

NOTE: Removal of the light diffuser from the card readers (depending on equipment) is carried out in the same way.

Plafonnier

The two mounting screws of the overhead light console (B).

Plafonnier

Pull the assembly towards the front and disconnect the connector.

REMOVAL - REFITTING OF THE BRACKET (D)

After removing the bulb, remove the screw (C) and unclip the bracket (D).

Plafonnier

SPECIAL POINT ON REFITTING

When refitting the bracket (D), check that the switch (E) is positioned to the right (see above) so as not to damage the contacts when clipping it in.

Test yourself

A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.