Rear head restraints

Use position

Raise or lower the head restraint while holding it pulled toward the front of the vehicle.

To remove it

Press tabs 1 and 2 simultaneously and pull the head restraint out.

Note: sedan version, first lower the rear seat backrest (refer to the “Rear seat functions” section in chapter 3).

To reinstall it

Insert the posts into the sleeves and lower the head restraint to the first notch.

Storage position

Lower the head restraint fully, then press tab 2 and lower it completely.

The fully lowered head restraint position (position A) is a storage position: it must not be used when a passenger is seated.

As the headrest is a safety feature, make sure it is present and correctly positioned: the top of the headrest should be as close as possible to the top of the head and the distance between the head and part A must be minimal.