Help
Instrument panel pin assignment
30-pin connector
pin 1: CAN H Electric Power Steering
pin 2: Not used
pin 3: Not used
pin 4: CAN L Electric Power Steering
pin 5: Not used
pin 6: Not used
pin 7: CAN H Central Communication Unit
pin 8: Not used
pin 9: CAN L Central Communication Unit
pin 10: Central Communication Unit
pin 11: Protection and Switching Unit
pin 12: Not used
pin 13: Protection and Switching Unit
pin 14: Fuel gauge
pin 15: Ground
pin 16: Not used
pin 17: Heated seat control
pin 18: Not used
pin 19: Not used
pin 20: Parking brake switch
pin 21: Brake fluid level switch
pin 22: Not used
pin 23: Not used
pin 24: Not used
pin 25: Lighting rheostat
pin 26: Not used
pin 27: Fuel gauge
pin 28: Not used
pin 29: Passenger Compartment Central Unit
pin 30: +12 V passenger compartment fuse and relay box
Instrument panel self-test activation method |
| Ignition off, hold down the on-board computer scroll button, and press the start button for approximately 7 seconds. The instrument panel enters self-test mode. During the self-test, each press of the on-board computer scroll button successively displays in the message display: "Test mode", the software version, any present or stored faults, the fuel gauge value, the fuel flow rate and "Test OK". To exit the self-test, briefly press the on-board computer reset button. |
Test yourself
A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.