Renault Megane Quiz
Electrical equipment

Controls

In this manual: Electrical equipment
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
~2min read
AC006 BUZZER

INSTRUCTIONS

Switch on the ignition, activate the control.

The buzzer must sound.

In case of a buzzer problem, contact your Techline.

AFTER REPAIR

Carry out a system diagnosis.

Deal with any other faults.

AC007 DISPLAY

INSTRUCTIONS

Switch on the ignition, activate the control.

The display lights up so that all indicator lamps can be checked, and shows on-board computer information.

If there is a display problem, replace the instrument panel.

AFTER REPAIR

Carry out a system diagnosis.

Deal with any other faults.

AC008 INSTRUMENT PANEL NEEDLES

INSTRUCTIONS

Switch on the ignition, activate the control.

The needles move across their full range of travel.

If the needles do not move correctly, contact your Techline.

AFTER REPAIR

Carry out a system diagnosis.

Deal with any other faults.

AC009 INSTRUMENT PANEL WARNING LIGHTS

INSTRUCTIONS

Switch on the ignition, activate the control.

The warning lights come on and go off one after another:

  • Check that lighting one warning light does not cause another warning light to come on, even partially.

Then all the warning lights come on:

  • check that they all light up correctly.

If the warning lights do not work correctly, contact your Techline.

AFTER REPAIR

Carry out a system diagnosis.

Deal with any other faults.

AC010 LIGHTING

INSTRUCTIONS

Switch on the ignition, activate the control.

The instrument panel lights up and its lighting level changes.

If there is a lighting problem, contact your Techline.

AFTER REPAIR

Carry out a system diagnosis.

Deal with any other faults.

AC011 MESSAGE DISPLAY

INSTRUCTIONS

Warning: Applies to the door-open warning lights on entry-level and mid-range instrument panels.

Applies to the Tyre Pressure Monitoring System warning lights on mid-range instrument panels.

Switch on the ignition, activate the control.

The message display illuminates

If there is a lighting problem, contact your Techline.

AFTER REPAIR

Carry out a system diagnosis.

Deal with any other faults.

AC012 AUTOMATIC TRANSMISSION MESSAGE DISPLAY

Mid-range instrument panel only

INSTRUCTIONS

Switch on the ignition, activate the control.

The automatic transmission information lights up.

Firstly, the selector lever position reminder, and secondly, the selected gear reminder in sequential mode.

If there is a display problem, contact your Techline.

AFTER REPAIR

Carry out a system diagnosis.

Deal with any other faults.

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.