Engine and peripherals
Glow plugs
In this manual: Engine and peripherals
~1min read
F9Q or K9K
Tightening torques |
|
| glow plugs | 1.5 daN.m |
The resistance of a glow plug is 0.6 Ω (connector disconnected).
The glow plugs can be removed without opening the high-pressure diesel circuit.
REMOVAL
- Disconnect the battery.
- Remove the engine covers.
K9K

- Disconnect the air duct.

- Unclip the glow plug electrical connectors.
- Clean around the glow plugs to prevent any debris from entering the cylinders.
- Loosen then remove the glow plugs using a 10 mm long socket with a universal joint.
- Use an extension to fully unscrew the glow plugs.
INSTALLATION
WARNINGAvoid any contamination entering the cylinder during this operation.
- Refit in the reverse order of removal.
- Tighten the glow plugs to torque (1.5 daN.m).
Connect the battery; carry out the necessary re-learns (see Electrical Equipment chapter).
Test yourself
A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
