Renault Megane Quiz
Engine and peripherals

Configurations and learning

In this manual: Engine and peripherals
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
~1min read

1. CONFIGURATION

ECU configuration by automatic detection

The ECU can configure itself automatically according to the sensors or vehicle options present.

2. LEARNING PROCEDURES

Engine flywheel target learning

Accelerate up to 4000 rpm in third gear, then decelerate until the engine re-engages with the drivetrain. Perform the procedure twice in succession.

Check the learning result with ET089.

Throttle stop learning

After replacing the ECU or the electronic throttle body, switch on the ignition and wait 30 seconds for the ECU to store the MAX and MIN stops.

Check the learning result with ET051.

Fault summary table

Tableau récapitulatif des défauts
Tableau récapitulatif des défauts

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.