Renault Megane Quiz
General vehicle information

Alignment

In this manual: General vehicle information
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
~1min read

REMINDER: For any jacking operation, the vehicle must be anchored to the repair bench. As this vehicle has no sill rebate, a specific anchoring kit must be used.

Mise au marbre

Remove:

  • the four front floor side member blanking plugs,
  • the two rear axle housing blanking plugs,
  • the handbrake cable retaining clips,
  • the wheel ABS sensor retaining clips.

WARNING: When fitting the fixings, take care not to crush the folded edges of the side floor members 1 and the rear axle housings 2 and 3.

After the operation, apply cavity protection and refit the blanking plugs, replacing them if damaged.

For fitting the anchoring kit, refer to the supplier data sheet.

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.