Hyundai Sonata LF Quiz
Body (Interior and Exterior)

Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 90Engine Electrical System — 58Emission Control System — 24Engine Control System/Fuel System — 114Drive Shaft and Axle — 15Suspension System — 35Steering — 19Restraints — 50Brake System — 54Body (Interior and Exterior) — 213Body Electrical System — 241Heating, Ventilation, and Air Conditioning — 56DCT (Dual Clutch Transmission) System — 52
8steps
~48min
2/5difficulty
Done 0 of 8

Replacement
  • Be careful not to damage the fender and body.
  • When removing the clips, use a clip remover.
  1. Remove the front bumper. (Refer to Front Bumper - "Front Bumper Cover")
  2. Remove the headlamps. (Refer to Body Electrical System - "Headlamps")
  3. Remove the rocker molding. (Refer to Body Side Moldings - Rocker Moldings)
  4. Remove the front wheel guard. (Refer to Body Side Moldings - "Front Wheel Guard")
  5. Remove the delta garnish. (Refer to Body Side Moldings - "Delta Garnish")
  6. Remove the front bumper side mounting brackets (S) after loosening the screw and bolt.
  7. Remove the fender assembly (A) after loosening the nut and bolts.
  8. Install in the reverse order of removal.
    • Replace all damaged clips.

Test yourself

A quick Hyundai Sonata LF quiz: every answer comes with an explanation and a link to the manual page.