Body Electrical System
Repair Procedures
In this manual: Body Electrical System
9steps
~54min
2/5difficulty
Done 0 of 9
Replacement
- Disconnect the negative (-) battery terminal.
- Remove the lower driver airbag panel. (Refer to Body - "Driver Airbag Module")
- Remove the upper and lower steering column covers.
- Remove the ignition lock (A) and disconnect the key warning/immobilizer system connector.

- If it is necessary to remove the key cylinder (A), press the stopper pin (B) with the ACC key and remove the key cylinder (A).

- Installation is the reverse of removal.
Inspection
- Disconnect the ignition switch connector (A) and the key warning switch connector (B) from under the steering column.


- Check the circuit between the terminals for continuity.
- If continuity is not as specified, replace the switch.

Test yourself
A quick Hyundai Sonata LF quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?