Sprocket mounting drum dust seal / bearing removal and installation

1. 1
   Remove the rear wheel assembly. Refer to “rear wheel assembly removal and installation” in section 2d .
2. 2
   Remove the rear sprocket mounting drum assembly (1). Refer to “rear sprocket / rear sprocket mounting drum removal and installation” (page 3a- 3).

   

3. Remove the retainer (2).

4. Remove the sprocket mounting drum dust seal with the special tool.

Special tool (a): 09913–50121 (oil seal
remover)

5. Remove the sprocket mounting drum bearing with the special tool.

Special tool (b): 09921–20240 (bearing remover
set)

Caution the removed dust seal and bearing must be replaced with new ones.

1. Apply grease to the bearing before installing.

: Grease 99000–25010 (suzuki
super grease “a” or equivalent)

2. Install the bearing and dust seal to the sprocket mounting drum with the special tools.

Caution the sealed cover of the bearing must face wheel hub side.

Special tool (a): 09924–84510 (bearing
installer set) (b): 09913–70210 (bearing
installing set (10 – 75 Ф))

3. Apply grease to the retainer.

: Grease 99000–25010 (suzuki
super grease “a” or equivalent)

1. 1
   Install the rear sprocket mounting drum assembly to rear wheel hub. Refer to “rear sprocket / rear sprocket mounting drum removal and installation” .
2. 2
   Install the rear wheel assembly. Refer to “rear wheel assembly removal and installation” in section 2d .