Starter button inspection

Inspect the starter button in the following procedures:

1. 1
   remove the air cleaner box. Refer to “air cleaner box removal and installation” in section 1d .
2. 2
   Disconnect the right handlebar switch coupler (1).

   

3. Inspect the starter button for continuity with the tester.

   If any abnormality is found, replace the right handle switch assembly with a new one. Refer to “handlebar removal and installation” in section 6b .

Special tool : 09900–25008 (multi circuit tester
set)

Tester knob indication continuity ()

4. After finishing the starter button inspection, reinstall the removed parts.