Suzuki GSX-R 1000 Quiz
Engine

Starter torque limiter removal and installation

In this manual: Engine
Foreword — 1Precautions — 15General information — 44Engine — 269Suspension — 52Driveline / axle — 13Brake — 51Transmission / transaxle — 34Steering — 15Body and accessories — 68
2steps
~12min
1/5difficulty
Done 0 of 2
Removal
  1. Remove the clutch assembly. Refer to “clutch removal” in section 5c .
  2. Remove the washer (1), starter idle gear no. 1 (2) And starter torque limiter (3).
    Suzuki GSX-R. Starter torque limiter removal and installation

Installation

Installation is in the reverse order of removal. Pay attention to the following point:

  • apply molybdenum oil solution to the starter torque limiter shaft hole.
M/o: molybdenum oil (molybdenum oil solution)
Suzuki GSX-R. Starter torque limiter removal and installation

  • Install the clutch assembly. Refer to “clutch installation” in section 5c .

Test yourself

A quick Suzuki GSX-R 1000 quiz: every answer comes with an explanation and a link to the manual page.