Turn signal switch inspection

Inspect the turn signal switch in the following procedures:

1. 1
   remove the air cleaner box. Refer to “air cleaner box removal and installation” in section 1d .
2. 2
   Disconnect the left handlebar switch coupler (1).

   

3. Inspect the turn signal switch for continuity with the tester. If any abnormality is found, replace the left handlebar switch assembly with a new one.

   Refer to “handlebar removal and installation” in section 6b .

Special tool : 09900–25008 (multi circuit tester
set)

Tester knob indication continuity ( )

4. After finishing the turn signal switch inspection, reinstall the removed parts.