Customize Parameters
1. CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)
HINT:
The following items can be customized.
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Customize.
(e) Select the setting by referring to the table below.
WiperDisplay | Default | Content | Setting |
|---|---|---|---|
Linked Rear Wiper Washer |
AVAIL |
Function to make the rear wiper run automatically after the washer function is used. |
NOT AVAIL or AVAIL |
Rewipe Function |
AVAIL |
Function to make the rear wiper run once automatically for a certain amount of time after the washer function is completed to prevent the dripping of washing fluid. |
NOT AVAIL or AVAIL |
Rear Wiper Interval Speed |
3 sec. |
Function used to change the time from when the rear wiper stops moving until it starts moving again in intermittent mode. |
3 sec., 2 sec., 4 sec. or 5 sec. |
Rear Wiper Retract Time |
3 sec. |
Function used to change the time from when the rear wiper stops moving after the rear wiper switch is turned off until the rear wiper is stored in the spoiler. |
3 sec., 4 sec., 5 sec. or 6 sec. |
Test yourself
A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.