Toyota 4Runner Quiz
Suspension

Disassembly

In this manual: Suspension
General — 25Audio / Visual / Telematics — 283Brake — 187Drivetrain — 204Power Source / Network — 79Steering — 76Suspension — 130Vehicle Exterior — 391Vehicle Interior — 693
~1min read
4special tools
DISASSEMBLY PROCEDURE

1. REMOVE FRONT NO. 1 LOWER ARM BUSH LH

(a) Using a chisel and hammer, pry the flange of the bush outward.

(b) Using SST and a press, press out the bush.

SST: 09632-36010

SST: 09950-00020

SST: 09950-60010

09951-00400

2. REMOVE FRONT NO. 2 LOWER ARM BUSH LH

(a) Using a chisel and hammer, pry the flange of the bush outward.

(b) Using SST and a press, press out the bush.

SST: 09632-36010

SST: 09950-00020

SST: 09950-60010

09951-00400

3. REMOVE LOWER BALL JOINT DUST COVER LH

(a) Using a snap ring expander, remove the dust cover set ring and dust cover from the lower arm.

NOTICE:

  • Do not damage the ball joint dust cover.
  • If the ball joint dust cover is damaged, replace it.

Test yourself

A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.