Disassembly

DISASSEMBLY PROCEDURE

1. REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY

2. REMOVE NO. 1 POWER OUTLET SOCKET COVER

3. REMOVE REAR CONSOLE END PANEL

(a) Detach the 4 clips and 4 claws to remove the rear console end panel.

(b) Disconnect the 2 power outlet socket assembly connectors.

4. REMOVE NO. 3 POWER OUTLET SOCKET ASSEMBLY

5. REMOVE CENTER POWER OUTLET SOCKET COVER

6. REMOVE CONSOLE BOX REGISTER ASSEMBLY

(a) Detach the 4 claws to remove the console box register assembly.

7. REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY

(a) Remove the 6 screws and console compartment door sub-assembly.

8. REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY

(a) Remove the 2 screws and console compartment door lock sub-assembly.

9. REMOVE CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY

(a) Remove the 4 screws.

(b) Using a screwdriver, detach the 6 claws to remove the console compartment inner door.

Text in Illustration

*1	Protective Tape

HINT:

Tape the screwdriver tip before use.

(c) Remove the 4 screws and console compartment door hinge sub-assembly.

10. REMOVE CONSOLE CUP HOLDER BOX

(a) Remove the 6 screws and console cup holder box.

11. REMOVE BACK DOOR POWER WINDOW REGULATOR SWITCH ASSEMBLY

12. REMOVE SEAT HEATER SWITCH (w/ Seat Heater System)

13. REMOVE SWITCH BASE

(a) Remove the 2 screws and switch base.

14. REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY (for VF2A)

(a) Detach the 6 claws to remove the shifting hole cover sub-assembly.

15. REMOVE FRONT UPPER CONSOLE PANEL GARNISH

(a) for VF2A:

(1) Detach the 6 claws to remove the front upper console panel garnish. Text in Illustration *A for VF2A

(b) for 2WD, for VF2BM, VF4BM:

(1) Detach the 10 claws to remove the front upper console panel garnish.

Text in Illustration

*A

for 2WD

*B

for VF2BM, VF4BM

16. REMOVE NO. 2 BOX BOTTOM MAT (for 2WD)

(a) Detach the 4 claws to remove the No. 2 box bottom mat.

17. REMOVE TRANSFER POSITION SWITCH (for VF2BM)

18. REMOVE TRANSFER POSITION SWITCH (for VF4BM)