Vehicle Exterior
Installation
In this manual: Vehicle Exterior
~1min read
INSTALLATION CAUTION / NOTICE / HINT
.gif)
.gif)
.gif)
.gif)
HINT:
- Use the same procedure for both the RH and LH sides.
- The procedure listed below is for the LH side.
1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH
(a) Attach the claw to install the outer rear view mirror assembly LH.
(b) Install the 3 nuts in the order shown in the illustration. Torque: 8 N·m {82 kgf·cm, 71 in·lbf} |
![]() |
(c) Attach the clamp.
(d) Connect the connector.
2. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP LH
.gif)
3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
.gif)
4. INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH
.gif)
5. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH
.gif)
Test yourself
A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
