Installation

1. INSTALL NAVIGATION ANTENNA ASSEMBLY

(a) Install the antenna with the 2 screws.

Torque:

2,5 N·m {25 kgf·cm, 22 in·lbf}

(b) Attach the clamp.

2. INSTALL DEFROSTER NOZZLE ASSEMBLY

3. INSTALL NO. 3 HEATER TO REGISTER DUCT

4. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT

5. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT

6. INSTALL NO. 2 HEATER TO REGISTER DUCT

7. INSTALL NO. 1 HEATER TO REGISTER DUCT

8. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY

(a) Install the instrument panel sub-assembly (See page ).

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).