Removal

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

2. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY

(a) Remove the instrument panel sub-assembly (See page ).

3. REMOVE NO. 1 HEATER TO REGISTER DUCT

4. REMOVE NO. 2 HEATER TO REGISTER DUCT

5. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT

6. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT

7. REMOVE NO. 3 HEATER TO REGISTER DUCT

8. REMOVE DEFROSTER NOZZLE ASSEMBLY

9. REMOVE NAVIGATION ANTENNA ASSEMBLY

(a) Detach the clamp.

(b) Remove the 2 screws and antenna.