Toyota 4Runner: Installation

INSTALLATION PROCEDURE

1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

(a) Install the spring and check ball body.

(b) Insert the pin of the manual valve into the hole of the manual valve lever.

Text in Illustration

Torque:

11 N·m {112 kgf·cm, 8 ft·lbf}

HINT:

Each bolt length is indicated below.

36 mm (1.42 in.) for bolt A

25 mm (0.984 in.) for bolt B

(d) Install the detent spring cover and detent spring with the bolt.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

2. CONNECT TRANSMISSION WIRE

3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY

4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

5. ADD AUTOMATIC TRANSMISSION FLUID

(a) Add automatic transmission fluid (See page ).

6. PERFORM RESET MEMORY

(a) Perform the RESET MEMORY procedures (A/T initialization) (See page ).

Installation