Removal

1. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

2. REMOVE REAR ENGINE UNDER COVER ASSEMBLY

3. REMOVE FRONT FENDER APRON SEAL RH

4. REMOVE FRONT NO. 1 FENDER APRON TO FRAME SEAL RH

5. REMOVE NO. 1 OIL COOLER INLET HOSE AND NO. 1 OIL COOLER OUTLET HOSE

(a) Detach the claw to open the No. 1 flexible hose clamp.

(b) Disconnect the No. 1 oil cooler inlet hose and No. 1 oil cooler outlet hose from the No. 2 oil cooler tube.

(c) Disconnect the 2 hoses from the oil cooler inlet tube and No. 1 oil cooler outlet tube and remove them.

NOTICE:

When disconnecting the hoses from the tube, support the tube by hand and be careful to prevent the tube from being deformed.

6. REMOVE NO. 1 OIL COOLER INLET TUBE AND NO. 1 OIL COOLER OUTLET TUBE

(a) Using a union nut wrench, disconnect the No. 1 oil cooler inlet tube and No. 1 oil cooler outlet tube from each oil cooler tube union.

(b) Remove the 2 bolts to open the 2 No. 2 flexible hose clamps and remove the 2 oil cooler tubes.

(c) Remove the 2 bolts and 2 No. 2 flexible hose clamps.

7. REMOVE NO. 2 OIL COOLER INLET HOSE AND NO. 2 OIL COOLER OUTLET HOSE

(a) Disconnect the No. 2 oil cooler inlet hose and No. 2 oil cooler outlet hose from the radiator.

(b) Disconnect the 2 hoses from the No. 2 oil cooler tube and remove them.

NOTICE:

When disconnecting the hoses from the tube, support the tube by hand and be careful to prevent the tube from being deformed.

8. REMOVE NO. 2 OIL COOLER TUBE SUB-ASSEMBLY

(a) Remove the 2 bolts and No. 2 oil cooler tube.