Telephone Antenna

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

2. REMOVE ROOF HEADLINING ASSEMBLY

(a) Remove the roof headlining assembly (See page ).

3. REMOVE TELEPHONE ANTENNA ASSEMBLY

(a) Remove the antenna nut.

(b) Disconnect the connector.

(c) Detach the 2 claws and remove the telephone antenna.

1. INSTALL TELEPHONE ANTENNA ASSEMBLY

(a) Align the positioning pin of the telephone antenna with the hole and set the antenna on the vehicle.

(b) Attach the 2 claws to install the telephone antenna.

(c) Connect the connector.

(d) Install the antenna nut.

Torque:

4,5 N·m {46 kgf·cm, 40 in·lbf}

2. INSTALL ROOF HEADLINING ASSEMBLY

(a) Install the roof headlining assembly (See page ).

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

4. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light (See page ).