Brake Control / Dynamic Control Systems

VSC OFF Switch

~1min read

Components

COMPONENTS

ILLUSTRATION

*1

VSC OFF SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY)

-

-

Inspection

INSPECTION

PROCEDURE

1. INSPECT VSC OFF SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY) (for LHD)

(a) Check the resistance.

(1) Measure the resistance according to the value(s) shown in the table below.

Standard resistance:

Tester Connection

Condition

Specified Condition

13 (+) - 8 (E)

Switch pressed

Below 1 Ω

13 (+) - 8 (E)

Switch released

10 kΩ minimum

If the result is not as specified, replace the VSC OFF switch (electric parking brake switch assembly).

*a

Component without wire harness connected

(VSC OFF switch (electric parking brake switch assembly))

2. INSPECT VSC OFF SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY) (for RHD)

(a) Check the resistance.

(1) Measure the resistance according to the value(s) shown in the table below.

Standard resistance:

Tester Connection

Condition

Specified Condition

11 (+) - 8 (E)

Switch pressed

Below 1 Ω

11 (+) - 8 (E)

Switch released

10 kΩ minimum

If the result is not as specified, replace the VSC OFF switch (electric parking brake switch assembly).

*a

Component without wire harness connected

(VSC OFF switch (electric parking brake switch assembly))