Wiper / Washer

Washer Nozzle (for Rear Side)

~1min read

Inspection On Vehicle

INSPECTION ON VEHICLE

PROCEDURE

1. INSPECT REAR WASHER NOZZLE

(a) Operate the rear washer nozzle and check the position where the washer fluid contacts the back door glass.

Standard:

The washer fluid contacts the back door glass within the area shown in the illustration.

*a

Vehicle center line

*b

Ceramic line

Measurement

-

-

Standard measurement:

Area

Measurement

Area

Measurement

A

16.9 mm (0.665 in.)

B

22.5 mm (0.886 in.)

HINT:

If the result is not as specified, replace the rear washer nozzle.

Components

COMPONENTS

ILLUSTRATION

*1

REAR WASHER NOZZLE

-

-

Removal

REMOVAL

PROCEDURE

1. REMOVE REAR SPOILER ASSEMBLY

Click here

2. REMOVE REAR WASHER NOZZLE

(a) Disconnect the rear washer hose.

(b) Release the claws and remove the rear washer nozzle.

Installation

INSTALLATION

PROCEDURE

1. INSTALL REAR WASHER NOZZLE

(a) Engage the claws to install the rear washer nozzle.

(b) Connect the rear washer hose.

2. INSPECT REAR WASHER NOZZLE

Click here

3. INSTALL REAR SPOILER ASSEMBLY

Click here