Overhead Light
Components
COMPONENTS
ILLUSTRATION
*1 |
NO. 1 OVERHEAD LIGHT ASSEMBLY |
*2 |
NO. 2 OVERHEAD LIGHT BULB |
*3 |
OVERHEAD LIGHT LENS |
*4 |
OVERHEAD LIGHT HOUSING |
Removal
REMOVAL
PROCEDURE
1. REMOVE NO. 1 OVERHEAD LIGHT ASSEMBLY
(a) Using a screwdriver with its tip wrapped in protective tape, release the claws to remove the dome light lens, as shown in the illustration.
*a |
Protective tape |
![]() |
Remove in this direction |
(b) Using a screwdriver with its tip wrapped in protective tape, release the claws to remove the overhead light housing from the headliner. |
|
(c) Using a screwdriver with its tip wrapped in protective tape, release the claws and guide to remove the overhead light housing from the base of the overhead light switch. |
|
2. REMOVE NO. 2 OVERHEAD LIGHT BULB
(a) Remove the No. 2 overhead light bulb, as shown in the illustration.
![]() |
Remove in this direction (1) |
![]() |
Remove in this direction (2) |
Installation
INSTALLATION
PROCEDURE
1. INSTALL NO. 2 OVERHEAD LIGHT BULB
(a) Install the No. 2 dome light bulb, as shown in the illustration.
![]() |
Install in this direction (1) |
![]() |
Install in this direction (2) |
2. INSTALL NO. 1 OVERHEAD LIGHT ASSEMBLY
(a) Engage the guide and the claws to reinstall the dome light housing on the dome light switch base. |
![]() |
(b) Engage the claws to reinstall the dome light housing on the headliner. |
![]() |
(c) Engage the claws to reinstall the dome light lens, as shown in the illustration.
![]() |
Install in this direction |
.png)


.png)
.png)
.png)

