Inside Rear View Mirror (Interior)

Installation

~1min read
010203040501.81N·mlb·ft
Tightening torque found on this page

INSTALLATION

PROCEDURE

1. INSTALL INSIDE REAR VIEW MIRROR ASSEMBLY (without Pre-Collision System)

(a) Install the inside rear view mirror assembly as shown in the illustration.

Install in this direction

(b) Using a "TORX" T20 socket wrench, install the screw.

Torque:

1.8 N·m {18 kgf·cm, 16 in·lbf}

(c) Connect the connector.

2. INSTALL INSIDE REAR VIEW MIRROR BRACKET COVER (without Pre-Collision System)

(a) Engage the claws to install the inside rear view mirror bracket cover as shown in the illustration.

Install in this direction

(b) Slide the inside rear view mirror bracket cover to engage the guides.

3. INSTALL INSIDE REAR VIEW MIRROR ASSEMBLY (with Pre-Collision System)

(a) Install the inside rear view mirror assembly as shown in the illustration.

Install in this direction

(b) Using a "TORX" T20 socket wrench, install the screw.

Torque:

1.8 N·m {18 kgf·cm, 16 in·lbf}

(c) Engage the clip.

(d) Connect the connector.

4. INSTALL NO. 1 FRONT MONITOR COVER (with Pre-Collision System)

Click here

5. INSTALL NO. 2 FRONT MONITOR COVER (with Pre-Collision System)

Click here