Inside Rear View Mirror (Interior)
Inspection
In this manual: Inside Rear View Mirror (Interior)
~1min read
INSPECTION
PROCEDURE
1. INSPECT INSIDE REAR VIEW MIRROR ASSEMBLY
(a) Check the operation of the electrochromic inside rear view mirror assembly.
*a |
Black tape |
*b |
Front sensor |
*c |
Bright |
*d |
Dark |
*e |
Battery |
*f |
AUTO switch |
*g |
Component without wire harness connected (Inside Rear View Mirror Assembly) |
- |
- |
(1) Connect the positive (+) battery cable to terminal 4 and the negative (-) cable to terminal 1.
(2) Press the AUTO switch.
(3) Apply black tape to the front sensor to prevent it from detecting light.
(4) Shine a flashlight on the rear view mirror and check that the mirror surface darkens.
OK:
The mirror surface darkens.
If the result is not as specified, replace the inside rear view mirror assembly.
Was this page helpful?