Tire Pressure Monitoring
Installation
In this manual: Tire Pressure Monitoring
~1min read
INSTALLATION
PROCEDURE
1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER
NOTICE:
- Do not drop, strike or subject the tire pressure warning ECU and receiver to impact.
- If the tire pressure warning ECU and receiver are subjected to impact, replace them.
(a) Connect the connector. |
|
(b) Engage the 2 guides and install the tire pressure warning ECU and receiver with the bolt.
Torque:
for type A:
8 N·m {82 kgf·cm, 71 in·lbf}
for type B:
13 N·m {133 kgf·cm, 10 ft·lbf}
2. INSTALL LH LUGGAGE COMPARTMENT SIDE TRIM PANEL ASSEMBLY
Click here
![]()
3. REGISTER TRANSMITTER ID
Click here![]()
4. INSPECT TIRE PRESSURE WARNING SYSTEM
Click here![]()
5. PERFORM INITIALIZATION
Click here![]()
Was this page helpful?
.png)