Seat Belt

Child Seat Anchor Bracket

~2min read
0102030405019.514N·mlb·ft
Tightening torque found on this page

Components

COMPONENTS

ILLUSTRATION

*A

for left side

*B

for right side

*1

REAR SEAT CUSHION ASSEMBLY (BENCH TYPE)

*2

CROSSMEMBER ANCHOR BRACKET SUB-ASSEMBLY

*3

REAR CENTER SEAT BELT OUTER BELT ASSEMBLY

*4

REAR SEAT CUSHION LOCK HOOK

Torque for "Main Areas Related to Basic Vehicle Performance" such as Driving/Turning/Stopping: N*m (kgf*cm, lbf*ft)

●

Non-reusable part

Installation

INSTALLATION

PROCEDURE

1. INSTALL CROSSMEMBER ANCHOR BRACKET SUB-ASSEMBLY (for LH side)

(a) Temporarily install the crossmember anchor bracket sub-assembly with the 2 bolts.

(b) Tighten the 2 bolts in the order shown in the illustration.

Torque:

19.5 N·m {199 kgf·cm, 14 ft·lbf}

(c) Engage the clips.

2. INSTALL CROSSMEMBER ANCHOR BRACKET SUB-ASSEMBLY (for RH side)

(a) Temporarily install the crossmember anchor bracket sub-assembly with the 2 bolts.

(b) Tighten the 2 bolts in the order shown in the illustration.

Torque:

19.5 N·m {199 kgf·cm, 14 ft·lbf}

(c) Engage the clips.

3. INSTALL REAR SEAT CUSHION LOCK HOOK

Click here

4. INSTALL REAR SEAT CUSHION ASSEMBLY (BENCH TYPE)

Click here

5. CONNECT REAR CENTER SEAT BELT OUTER BELT ASSEMBLY

Click here

Removal

REMOVAL

PROCEDURE

1. DISCONNECT REAR CENTER SEAT BELT OUTER BELT ASSEMBLY

Click here

2. REMOVE REAR BENCH SEAT ASSEMBLY

Click here

3. REMOVE REAR SEAT CUSHION LOCK HOOK

Click here

4. REMOVE CROSSMEMBER ANCHOR BRACKET SUB-ASSEMBLY (for LH side)

(a) Release the clips.

(b) Remove the 2 bolts and the crossmember anchor bracket sub-assembly.

5. REMOVE CROSSMEMBER ANCHOR BRACKET SUB-ASSEMBLY (for RH side)

(a) Release the clips.

(b) Remove the 2 bolts and the crossmember anchor bracket sub-assembly.