Audio / Video

Inspection

~1min read

INSPECTION

PROCEDURE

1. INSPECT FRONT SPEAKER NO. 2 ASSEMBLY

(a) Check the resistance.

(1) Measure the resistance according to the value(s) shown in the table below.

Standard resistance:

for right side

Tester Connection

Condition

Specified Condition

4 (TWR+) - 2 (TWR-)

Always

10 kΩ minimum

1 (-) - 2 (TWR-)

Always

Below 1 Ω

3 (+) - 4 (TWR+)

Always

Below 1 Ω

for left side

Tester Connection

Condition

Specified Condition

4 (TWL+) - 2 (TWL-)

Always

10 kΩ minimum

1 (-) - 2 (TWL-)

Always

Below 1 Ω

3 (+) - 4 (TWL+)

Always

Below 1 Ω

If the result is not as specified, replace the front speaker No. 2 assembly.

*A

for right side

*B

for left side

*a

Component without wire harness connected

(front speaker No. 2 assembly)