Toyota Camry Quiz
Emission control

Charcoal canister assy (1MZ−FE/3MZ−FE)

In this manual: Emission control
Introduction — 61Audio & visual system — 16Automatic transmission / trans — 19Transmission revolution (ATM) — 1Shift lock system (ATM) — 1Brake — 20Clutch — 10Communication system — 4Cooling — 15Cruise control — 3Drive shaft / propeller shaft — 9Emission control — 8Engine control system — 12Engine hood/door — 7Exhaust — 3Exterior/interior trim — 14Front suspension — 9Fuel — 12Heater & air conditioner — 16Ignition — 8Instrument panel/meter — 7Intake — 7Lighting — 11Lubrication — 16Manual transmission/transaxle — 13Parking brake — 10Power steering — 7Rear suspension — 10Seat — 12Service specifications — 26Sliding roof/convertible — 4Starting & charging — 11Starting system (2AZ−FE)(From July, 2003) — 1Starting system (1MZ−FE/3MZ−FE) — 1Steering column — 6Theft deterrent & door lock — 9Tire & wheel — 4Windshield/windowglass/mirror — 5Back window glass — 1Power window control system — 1Power mirror control system — 1Inner rear view mirror assy — 1Windshield glass — 1Wiring — 1
8steps
~48min
2/5difficulty
02040608010039.229N·mlb·ft
Tightening torque found on this page
Done 0 of 8
REPLACEMENT
  1. REMOVE FUEL TANK ASSY
  2. REMOVE CHARCOAL CANISTER ASSY

a. Disconnect the fuel tank vent hose.

  1. Push the connector deep into the charcoal canister assy to release the locking tab.

  2. Pinch portion A.

  3. Pull out the connector.

  4. Disconnect the VSV connector for CCV.

  5. Disconnect the fuel emission hose.

  6. Disconnect the air inlet line hose.

    e. Remove the 2 bolts and charcoal canister.

e. Remove the 2 bolts and charcoal canister.

3. INSTALL CHARCOAL CANISTER ASSY Torque: 39 N·m
4. INSTALL FUEL TANK ASSY
4. INSTALL FUEL TANK ASSY

Test yourself

A quick Toyota Camry quiz: every answer comes with an explanation and a link to the manual page.