Toyota Camry Quiz
Emission control

Ventilation valve sub-assy (1MZ−FE/3MZ−FE)

In this manual: Emission control
Introduction — 61Audio & visual system — 16Automatic transmission / trans — 19Transmission revolution (ATM) — 1Shift lock system (ATM) — 1Brake — 20Clutch — 10Communication system — 4Cooling — 15Cruise control — 3Drive shaft / propeller shaft — 9Emission control — 8Engine control system — 12Engine hood/door — 7Exhaust — 3Exterior/interior trim — 14Front suspension — 9Fuel — 12Heater & air conditioner — 16Ignition — 8Instrument panel/meter — 7Intake — 7Lighting — 11Lubrication — 16Manual transmission/transaxle — 13Parking brake — 10Power steering — 7Rear suspension — 10Seat — 12Service specifications — 26Sliding roof/convertible — 4Starting & charging — 11Starting system (2AZ−FE)(From July, 2003) — 1Starting system (1MZ−FE/3MZ−FE) — 1Steering column — 6Theft deterrent & door lock — 9Tire & wheel — 4Windshield/windowglass/mirror — 5Back window glass — 1Power window control system — 1Power mirror control system — 1Inner rear view mirror assy — 1Windshield glass — 1Wiring — 1
4steps
~24min
2/5difficulty
010203040501914N·mlb·ft
Tightening torque found on this page
Done 0 of 4
REPLACEMENT 1. REMOVE VENTILATION VALVE SUB−ASSY

  1. Disconnect the PCV hose from the PCV valve.

  2. Remove the PCV valve.

2. INSTALL VENTILATION VALVE SUB−ASSY

a. Reinstall the PCV valve.

  1. Apply adhesive to 2 or 3 threads.

    Adhesive:
    Part No. 08833−00070, THREE BOND 1324 or equivalent

  2. Reinstall the PCV valve.

    Torque: 19 N·m

b. Connect the PCV hose to the PCV valve.

Install ventilation valve sub-assy
Install ventilation valve sub-assy

Test yourself

A quick Toyota Camry quiz: every answer comes with an explanation and a link to the manual page.