Toyota Camry Quiz
Clutch

Clutch accumulator assy

In this manual: Clutch
Introduction — 61Audio & visual system — 16Automatic transmission / trans — 19Transmission revolution (ATM) — 1Shift lock system (ATM) — 1Brake — 20Clutch — 10Communication system — 4Cooling — 15Cruise control — 3Drive shaft / propeller shaft — 9Emission control — 8Engine control system — 12Engine hood/door — 7Exhaust — 3Exterior/interior trim — 14Front suspension — 9Fuel — 12Heater & air conditioner — 16Ignition — 8Instrument panel/meter — 7Intake — 7Lighting — 11Lubrication — 16Manual transmission/transaxle — 13Parking brake — 10Power steering — 7Rear suspension — 10Seat — 12Service specifications — 26Sliding roof/convertible — 4Starting & charging — 11Starting system (2AZ−FE)(From July, 2003) — 1Starting system (1MZ−FE/3MZ−FE) — 1Steering column — 6Theft deterrent & door lock — 9Tire & wheel — 4Windshield/windowglass/mirror — 5Back window glass — 1Power window control system — 1Power mirror control system — 1Inner rear view mirror assy — 1Windshield glass — 1Wiring — 1
10steps
~60min
3/5difficulty
01020304050129N·mlb·ft
Tightening torque found on this page
Done 0 of 10
REPLACEMENT 1. DISCONNECT CLUTCH RELEASE CYLINDER TO FLEXIBLE HOSE TUBE

  1. Remove the bolt and separate the tube clamp bracket.

  2. Using SST, disconnect the 3 flexible hose tubes.

    SST 09023−00101 HINT: Use a container to catch the fluid.

2. REMOVE CLUTCH ACCUMULATOR ASSY

  1. Remove the 2 bolts and flexible hose bracket No.2.

  2. Remove the 2 nuts and clutch accumulator assy.

3. INSTALL CLUTCH ACCUMULATOR ASSY

  1. Install the clutch accumulator assy with the 2 nuts.

    Torque: 12 N·m

  2. Install the flexible hose bracket No.2 with the 2 bolts.

    Torque: Bolt A: 12 N·m Bolt B: 39 N·m
4. CONNECT CLUTCH RELEASE CYLINDER TO FLEXIBLE HOSE TUBE

  1. Using SST, connect the 3 flexible hose tubes to the clutch accumulator assy.

    SST 09023−00101 Torque: 15 N·m

  2. Install the tube clamp bracket with the bolt.

    Torque: 12 N·m
5. BLEED CLUTCH PIPE LINE

a. Fill the brake reservoir tank with brake fluid and bleed the clutch system.

Torque: 8,3 N·m
  1. CHECK CLUTCH FLUID LEAKAGE
  2. CHECK FLUID LEVEL IN RESERVOIR

Test yourself

A quick Toyota Camry quiz: every answer comes with an explanation and a link to the manual page.