Toyota Camry Quiz
Drive shaft / propeller shaft

Front axle lh hub bolt

In this manual: Drive shaft / propeller shaft
Introduction — 61Audio & visual system — 16Automatic transmission / trans — 19Transmission revolution (ATM) — 1Shift lock system (ATM) — 1Brake — 20Clutch — 10Communication system — 4Cooling — 15Cruise control — 3Drive shaft / propeller shaft — 9Emission control — 8Engine control system — 12Engine hood/door — 7Exhaust — 3Exterior/interior trim — 14Front suspension — 9Fuel — 12Heater & air conditioner — 16Ignition — 8Instrument panel/meter — 7Intake — 7Lighting — 11Lubrication — 16Manual transmission/transaxle — 13Parking brake — 10Power steering — 7Rear suspension — 10Seat — 12Service specifications — 26Sliding roof/convertible — 4Starting & charging — 11Starting system (2AZ−FE)(From July, 2003) — 1Starting system (1MZ−FE/3MZ−FE) — 1Steering column — 6Theft deterrent & door lock — 9Tire & wheel — 4Windshield/windowglass/mirror — 5Back window glass — 1Power window control system — 1Power mirror control system — 1Inner rear view mirror assy — 1Windshield glass — 1Wiring — 1
9steps
~54min
2/5difficulty
0408012016020010376N·mlb·ft
Tightening torque found on this page
Done 0 of 9
REPLACEMENT

HINT:

  • COMPONENTS

  • Replace the RH side by the same procedures with LH side.

  1. REMOVE FRONT WHEEL
  2. DISCONNECT FRONT DISC BRAKE CALIPER ASSY LH
  3. REMOVE FRONT DISC
  4. REMOVE FRONT AXLE LH HUB BOLT

a. Using SST and a screwdriver or an equivalent to hold, remove the front axle LH hub bolt.

SST 09628−10011

Remove front axle LH hub bolt
Remove front axle LH hub bolt 5. INSTALL FRONT AXLE LH HUB BOLT

  1. Install a washer and nut to a new front axle LH hub bolt as shown in the illustration.

  2. Using a screwdriver to hold, install the hub bolt by torquing the nut.

Install front axle LH hub bolt Install front axle LH hub bolt
  1. INSTALL FRONT DISC
  2. INSTALL FRONT DISC BRAKE CALIPER ASSY LH
  3. INSTALL FRONT WHEEL Torque: 103 N·m

Test yourself

A quick Toyota Camry quiz: every answer comes with an explanation and a link to the manual page.