Rear axle LH hub bolt

HINT:

• COMPONENTS:

• Replace the RH side by the same procedures with the LH side.

1. 1
   REMOVE REAR WHEEL
2. 2
   REMOVE REAR DISC BRAKE CALIPER ASSY LH (DISC REAR BRAKE TYPE)
3. 3
   REMOVE REAR DISC (DISC REAR BRAKE TYPE)
4. 4
   REMOVE REAR BRAKE DRUM SUB−ASSY (DRUM REAR BRAKE TYPE)
5. 5
   REMOVE REAR AXLE LH HUB BOLT

a. Using SST and a screwdriver or an equivalent to hold, remove the rear axle LH hub bolt.

SST 09628−10011

1. 1

   Install a washer and nut to a new rear axle LH hub bolt as shown in the illustration.

2. 2

   Using a screwdriver to hold, install the rear axle LH hub bolt by torquing the nut.

1. 1
   INSTALL REAR DISC (DISC REAR BRAKE TYPE)
2. 2
   INSTALL REAR DISC BRAKE CALIPER ASSY LH (DISC REAR BRAKE TYPE)
3. 3
   INSTALL REAR BRAKE DRUM SUB−ASSY (DRUM REAR BRAKE TYPE)
4. 4
   INSTALL REAR WHEEL Torque: 103 N·m