Lower ball joint assy front LH

HINT: COMPONENTS:

1. 1
   REMOVE FRONT WHEEL
2. 2
   REMOVE FRONT AXLE HUB LH NUT SST 09930−00010
3. 3
   DISCONNECT SPEED SENSOR FRONT LH (W/ ABS)
4. 4
   DISCONNECT FRONT DISC BRAKE CALIPER ASSY LH
5. 5
   REMOVE FRONT DISC
6. 6
   DISCONNECT TIE ROD END SUB−ASSY LH SST 09628−62011
7. 7
   DISCONNECT FRONT SUSPENSION ARM SUB−ASSY LOWER No.1 LH
8. 8
   REMOVE FRONT AXLE ASSY LH
9. 9
   REMOVE LOWER BALL JOINT ASSY FRONT LH SST 09628−62011
10. 10
    INSPECT LOWER BALL JOINT ASSY FRONT LH
11. 11
    As shown in the illustration, flip the ball joint stud back and forth 5 times, before installing the nut.
12. 12
    Using a torque wrench, turn the nut continuously at a rate of 3 − 5 seconds per 1 turn and take the torque reading on the 5th turn. Turning torque: 0.98 − 3,4 N·m

1. 1
   INSTALL LOWER BALL JOINT ASSY FRONT LH
2. 2
   INSTALL FRONT AXLE ASSY LH
3. 3
   INSTALL FRONT SUSPENSION ARM SUB−ASSY LOWER No.1 LH
4. 4
   INSTALL TIE ROD END SUB−ASSY LH
5. 5
   15. INSTALL FRONT DISC
6. 6
   INSTALL FRONT DISC BRAKE CALIPER ASSY LH
7. 7
   INSTALL SPEED SENSOR FRONT LH (W/ ABS)
8. 8
   INSTALL FRONT AXLE HUB LH NUT
9. 9
   INSTALL FRONT WHEEL Torque: 103 N·m
10. 10
    INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
11. 11
    CHECK ABS SPEED SENSOR SIGNAL (W/ ABS) w/ VSC
    w/o VSC (BOSCH MADE)
    w/o VSC (DENSO MADE