Power point socket assy

HINT: COMPONENTS:

1. 1
   REMOVE SHIFT LEVER KNOB SUB−ASSY (M/T TRANSAXLE)
2. 2
   REMOVE CONSOLE PANEL UPPER REAR
3. 3
   REMOVE INSTRUMENT PANEL CUP HOLDER (W/O ASHTRAY)
4. 4
   REMOVE FRONT ASH RECEPTACLE ASSY (W/ ASHTRAY)
5. 5
   REMOVE CONSOLE PANEL SUB−ASSY UPPER
6. 6
   REMOVE POWER POINT SOCKET ASSY
7. 7
   Turn the socket in the circumference direction as shown in the illustration, disengage the claw between the socket and the power pint socket cover, and push out the socket to the room side.

   

8. 8
   Align the socket with the notch on the power point socket cover, remove the power point socket assy to the room side.

   

1. Align the socket with the notch on the power point socket cover, push the power point socket assy into as hard as possible and install it.