Rear combination lamp assy LH

HINT:

• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.
• Installation is in the reverse order of removal.

1. 1
   REMOVE LUGGAGE COMPARTMENT TRIM HOOK No.1
2. 2
   REMOVE REAR FLOOR FINISH PLATE
3. 3
   REMOVE REAR COMBINATION LAMP ASSY LH
4. 4
   Disconnect the connector.
5. 5
   Remove the 3 nuts and the rear combination lamp assy LH.

   

c. Remove the rear combination lamp gasket RH.

1. 1
   Turn in the direction indicated by the arrow and remove the 3 rear combination lamp socket & wire sub−assy RHs and the 3 rear combination lamp bulbs as a unit.
2. 2
   Remove the 3 rear combination lamp bulbs from the 3 rear combination lamp socket & wire sub−assy RHs.

1. 1
   Turn in the direction indicated by the arrow and remove the rear combination lamp socket & wire sub−assy RH and the rear combination lamp bulb as a unit.
2. 2
   Remove the rear combination lamp bulb from the rear combination lamp socket & wire sub−assy RH.