Vehicle Exterior
Adjustment
In this manual: Vehicle Exterior
~1min read
ADJUSTMENT
PROCEDURE
1. REMOVE WASHER NOZZLE SUB-ASSEMBLY
Click here ![]()
2. ADJUST WASHER NOZZLE SUB-ASSEMBLY
(a) Select a washer nozzle sub-assembly so that the position the washer fluid hits the windshield will be within the standard area. Replace the washer nozzle sub-assembly with the selected one.
*a |
Washer Fluid Spray Angle |
*b |
Part Number |
3. INSTALL WASHER NOZZLE SUB-ASSEMBLY
Click here ![]()
Was this page helpful?