Calibration
CALIBRATION
POWER STEERING ECU INITIAL SETTING (ASSIST MAP WRITING) (USING GTS)
NOTICE:
If any of the following conditions are met, perform Power Steering ECU Initial Setting (assist map writing):
- The power steering ECU assembly has been replaced.
- The electric power steering column sub-assembly has been replaced.
(a) Perform Power Steering ECU Initial Setting (assist map writing).
(1) Align the front wheels straight ahead and center the steering wheel.
(2) Enter the following menus: Chassis / EMPS / Utility / Power Steering ECU Initial Setting.
Chassis > EMPS > UtilityPower Steering ECU Initial Setting
NOTICE:
Do not turn the steering wheel sharply.
(3) Check for RoBs.
Chassis > EMPS > UtilityVehicle Control History (RoB)
NOTICE:
When Power Steering ECU Initial Setting (assist map writing) are completed, make sure to check for vehicle control history (RoB).
END POSITION INITIAL SETTING
NOTICE:
Perform end position initial setting after replacing or servicing parts related to steering operation.
Click here
![]()