Customize Parameters
CUSTOMIZE PARAMETERS
CUSTOMIZE FRONT CAMERA SYSTEM
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(a) Customizing with the GTS
(1) Select the setting by referring to the table below.
Front Recognition CameraTester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
PCS Function ON/OFF State Stored |
Refer to the table below |
Not Stored |
$00:Not Stored,$01:Stored |
Forward recognition camera |
PCS Warning Timing State Stored 1 |
Refer to the table below |
Stored |
$00:Not Stored,$01:Stored |
Forward recognition camera |
PCS Warning Timing State Stored 2 |
Refer to the table below |
Stored |
$00:Not Stored,$01:Stored |
Forward recognition camera |
PCS Collision Avoidance Assist Function |
Function that enables or disables the PCS Collision Avoidance Assist Function*1 |
ON |
$00:OFF,$01:ON |
Forward recognition camera |
PCS Reminder Buzzer Sound |
Function that enables or disables the PCS Reminder Buzzer Sound*1 |
OFF |
$00:OFF,$01:ON |
Forward recognition camera |
PCS Right Turn/Left Turn Warning Function |
Function that enables or disables the PCS Right Turn/Left Turn Warning Function*1 |
ON |
$00:OFF,$01:ON |
Forward recognition camera |
PCS Right Turn/Left Turn Warning Buzzer Sound |
Function that enables or disables the PCS Right Turn/Left Turn Warning Buzzer Sound*1 |
ON |
$00:OFF,$01:ON |
Forward recognition camera |
Mild Braking in Plus Support Mode |
Function that enables or disables the Mild Braking in Plus Support Mode*1 |
ON |
$00:OFF,$01:ON |
Forward recognition camera |
PCS Drive Monitor Early Warning Function |
Function that enables or disables the PCS Drive Monitor Early Warning Function using the Driver Monitor*1 |
ON |
$00:OFF,$01:ON |
Forward recognition camera |
2 actioned Service Command |
Ready status of the driving assistant system is selected with the ignition switch ON (IG) HINT:
|
Invalid |
$00:Invalid,$01:Valid |
Forward recognition camera |
AHB/AHS Performance Adjustment |
Function that selects the AHB/AHS Performance Adjustment setting*2 |
Normal |
$00:Normal,$01:Special Performance 1 |
Forward recognition camera |
- *1: Cannot be used
- *2: Make sure to check the customize setting item "AHB/AHS City Area Constant" before customize settings.
When AHB/AHS City Area Constant is Pattern 1 or 2: By setting to "Special Performance 1", operations (changes to high beam, etc.) at places with bright surroundings such as a street will increase.
When AHB/AHS City Area Constant is Pattern 3: By setting to "Special Performance 1", operations (changes to high beam, etc.) at places with bright surroundings such as a street will decrease.
Customize Setting | Description | Setting |
|---|---|---|
PCS Function ON/OFF State Stored |
Function to maintain the pre-collision system on/off setting when the ignition switch is turned to ON from off. |
Not stored: Pre-collision system always turns on Stored: Pre-collision system maintains previous setting |
PCS Warning Timing State Stored 1 |
Function to set whether or not to store the warning sensitivity setting when the PCS function is turned from off to on while the ignition switch is ON. |
Not Stored: Sensitivity setting is reset to default Stored: Sensitivity settings are maintained as previous value |
PCS Warning Timing State Stored 2 |
Function to set whether or not to store the warning sensitivity setting when the PCS function is on and the ignition switch is turned from off to ON. |
Not Stored: Sensitivity setting is reset to default Stored: Sensitivity settings are maintained as previous value |