Front Recognition Camera Optical Axis Misalignment Malfunction (C1AA800)
DESCRIPTION
The forward recognition camera monitors its optical axis status. If it determines that the optical axis alignment has become misaligned, it will store DTC C1AA800.
DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from |
|---|---|---|---|---|
C1AA800 |
Front Recognition Camera Optical Axis Misalignment Malfunction |
When a misalignment of the forward recognition camera is detected |
|
Front Recognition Camera |
NOTICE:
- When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and a DTC may be stored.
- When the forward recognition camera has been replaced with a new one, make sure to clear all stored vehicle control history of each system and the forward recognition camera beam axis alignment data.
HINT:
Forward recognition camera beam axis alignment can be performed by using "One Time Recognition", "Driving Adjustment" or "Camera Axis Adjustment Value Write".
One Time Recognition: Click here
.gif)
Driving Adjustment: Click here
.gif)
Camera Axis Adjustment Value Write: Click here
.gif)
- If the forward recognition camera has been replaced with a new one, make sure to perform Software Version Confirmation.
Click here
.gif)
- When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket or the forward recognition camera may not operate properly due to a difference in the transmissivity or black ceramic border.
- Forward recognition camera optical axis may deviate if the vehicle is driven on a banked road, such as a racetrack. This deviation can be corrected by driving the vehicle on a normal road for a while.
- Forward recognition camera optical axis may deviate when the vehicle is overloaded or the wheel alignment (toe-in) is incorrect. The forward recognition camera optical axis can be corrected by decreasing the load on the vehicle or adjusting the toe-in.
PROCEDURE
CHECK FORWARD RECOGNITION CAMERA INSTALLATION
HINT:
Click here ![]()
HINT:
If there is deformation or deviation in the forward recognition camera installation bracket, replace the windshield glass.
OK:
No deformation or deviation in forward recognition camera installation bracket.
| NG | GO TO STEP 11 |
|
CHECK VEHICLE OPERATING CONDITION
HINT:
Check if a condition which caused the forward recognition camera optical axis to become temporarily misaligned existed, such as if the vehicle was overloaded, towed or modified.
OK:
Vehicle was not overloaded, towed or modified.
| NG | GO TO STEP 9 |
|
CHECK WHEEL ALIGNMENT (TOE)
- for Front Wheel Alignment: Click here
.gif)
- for Rear Wheel Alignment:
for 2WD: Click here
.gif)
for AWD: Click here
.gif)
OK:
Front and rear wheels are not misaligned (toe)
| NG | GO TO STEP 6 |
|
PERFORM FORWARD RECOGNITION CAMERA ADJUSTMENT
Forward recognition camera beam axis alignment can be performed by using "One Time Recognition", "Driving Adjustment" or "Camera Axis Adjustment Value Write".
One Time Recognition: Click here ![]()
Driving Adjustment: Click here ![]()
Camera Axis Adjustment Value Write: Click here ![]()
|
CLEAR DTC
(a) Clear the DTCs.
Chassis > Front Recognition Camera > Clear DTCs| NEXT | END |
ADJUST WHEEL ALIGNMENT (TOE)
- for Front Wheel Alignment: Click here
.gif)
- for Rear Wheel Alignment:
for 2WD: Click here
.gif)
for AWD: Click here
.gif)
|
PERFORM FORWARD RECOGNITION CAMERA ADJUSTMENT
Forward recognition camera beam axis alignment can be performed by using "One Time Recognition", "Driving Adjustment" or "Camera Axis Adjustment Value Write".
One Time Recognition: Click here ![]()
Driving Adjustment: Click here ![]()
Camera Axis Adjustment Value Write: Click here ![]()
|
CLEAR DTC
(a) Clear the DTCs.
Chassis > Front Recognition Camera > Clear DTCs| NEXT | END |
PERFORM FORWARD RECOGNITION CAMERA ADJUSTMENT
(a) Return the vehicle to normal operating conditions.
(b) Perform forward recognition camera adjustment.
HINT:
Forward recognition camera beam axis alignment can be performed by using "One Time Recognition", "Driving Adjustment" or "Camera Axis Adjustment Value Write".
One Time Recognition: Click here ![]()
Driving Adjustment: Click here ![]()
Camera Axis Adjustment Value Write: Click here ![]()
|
CLEAR DTC
(a) Clear the DTCs.
Chassis > Front Recognition Camera > Clear DTCs| NEXT | END |
REPLACE WINDSHIELD GLASS
HINT:
Click here ![]()
|
PERFORM FORWARD RECOGNITION CAMERA ADJUSTMENT
Forward recognition camera beam axis alignment can be performed by using "One Time Recognition", "Driving Adjustment" or "Camera Axis Adjustment Value Write".
One Time Recognition: Click here ![]()
Driving Adjustment: Click here ![]()
Camera Axis Adjustment Value Write: Click here ![]()
|
CLEAR DTC
(a) Clear the DTCs.
Chassis > Front Recognition Camera > Clear DTCs| NEXT | END |