DTC | Component | Fail-safe Operation | Fail-safe Deactivation Condition |
P033562 |
Open in engine speed signal circuit |
- |
All of the following conditions are met for 10 seconds or more:
- Normal communication with ECM
- Engine speed (pulse signal) 500 rpm or higher
- Engine speed (communication signal) 500 rpm or higher
- Difference between engine speed from pulse signal and engine speed from communication signal is less than 300 rpm
|
P055500
P05552A |
- Vacuum sensor assembly
- Brake booster assembly
- Vacuum hose (brake booster hose)
|
- Stop and start control is prohibited
- Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control
|
One of the following conditions is met:
- Vacuum changes while the brake pedal is depressed
- Vacuum changes a specified number of times while the vehicle is being driven faster than a certain vehicle speed
|
P055511
P055515 |
Vacuum sensor assembly circuit |
- Stop and start control is prohibited
- Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control
|
Sensor output is within standard range |
P060629 |
Engine stop and start ECU |
- Stop and start control is prohibited
- Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control
|
Pass condition detected and ignition switch turned to ON |
P060B1C
P060B49
P060B71 |
Analog to digital converter (Engine stop and start ECU) |
- Stop and start control is prohibited
- Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control
|
Pass condition detected and ignition switch turned to ON |
P061511 |
ST relay circuit |
Stop and start control is prohibited |
Pass condition detected and DTCs are cleared |
P061515 |
Starter circuit |
- Stop and start control is prohibited
- Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control
|
Communication with ECM returns to normal and one of the following conditions is met:
- The STA signal detected by the ECM and STA signals detected by the engine stop and start ECU are on for 0.3 seconds
- The STA signal detected by the ECM and STA signals detected by the engine stop and start ECU are off for 5 seconds
|
P085012
P085014 |
Park/Neutral position switch assembly circuit |
- |
Pass condition detected and DTCs are cleared |
P094296 |
Oil pump with motor assembly circuit |
- Stop and start control is prohibited
- Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control
|
Pass condition detected and DTCs are cleared |
P0C2B11
P0C2B15
P279796 |
Oil pump with motor assembly circuit |
- Stop and start control is prohibited
- Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control
|
Pass condition detected and ignition switch turned to ON |
P164400 |
- Starter drive circuit
- ST relay
- Engine stop and start ECU
|
- Stop and start control is prohibited
- Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control
|
Voltage of engine stop and start ECU internal drive circuit for starter is correct when engine is idling and restarted |
P253014 |
IG signal circuit |
- Stop and start control is prohibited (for Mexico Models)
- Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control (for Mexico Models)
|
All of the following conditions are met for 10 seconds or more:
- Ignition switch ON
- Normal communication with ECM
- Ignition switch (communication) ON.
|
P323A00
P323B14
P323B29
P323B38 |
Backup boost converter circuit |
- Stop and start control is prohibited
- Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control
|
Pass condition detected and DTCs are cleared |
P323A16 |
Backup boost converter circuit |
- Stop and start control is prohibited (for Mexico Models)
- Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control (for Mexico Models)
|
Pass condition detected and DTCs are cleared |
P33B300 |
External backup boost converter (eco run vehicle converter assembly) circuit |
- Stop and start control is prohibited (for Mexico Models)
- Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control (for Mexico Models)
|
1 second after external backup boost converter (eco run vehicle converter assembly) circuit becomes idle |
U010087 |
CAN communication (ECM) |
- Stop and start control is prohibited
- Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control
|
Communication with engine stop and start ECU continues for 2 seconds |
U115C87 |
CAN communication (ECM) |
- |
- |
U010187 |
CAN communication (TCM) |
- Stop and start control is prohibited
- Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control
|
Communication with engine stop and start ECU continues for 21.6 seconds |
U012687 |
CAN communication (steering sensor) |
- |
- |
U012987 |
CAN communication (skid control ECU (brake actuator assembly)) |
- Stop and start control is prohibited
- Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control
|
Communication with engine stop and start ECU continues for 4.4 seconds |
U014087 |
CAN communication (main body ECU (multiplex network body ECU)) |
- Stop and start control is prohibited (for Mexico Models)
- Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control (for Mexico Models)
|
Communication with engine stop and start ECU continues for 7.2 seconds |
U015187 |
CAN communication (airbag ECU assembly) |
- Stop and start control is prohibited (for Mexico Models)
- Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control (for Mexico Models)
|
Communication with engine stop and start ECU continues for 21.2 seconds |
U015587 |
CAN communication (combination meter assembly) |
- Stop and start control is prohibited
- Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control
|
Communication with engine stop and start ECU continues for 21.2 seconds |
U016487 |
CAN communication (air conditioning amplifier assembly) |
- Stop and start control is prohibited (for Mexico Models)
- Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control (for Mexico Models)
|
Communication with engine stop and start ECU continues for 21.2 seconds |
U117087 |
Local CAN communication (skid control ECU (brake actuator assembly)) |
- Stop and start control is prohibited
- Engine is automatically restarted if a DTC is stored while the engine is stopped by stop and start control
|
Communication with engine stop and start ECU continues for 21.2 seconds |