Brake

Inspection

~1min read

INSPECTION

PROCEDURE

1. INSPECT PARKING BRAKE ACTUATOR ASSEMBLY LH

(a) Parking brake actuator assembly LH operation inspection

(1) Apply voltage to the terminals of the parking brake actuator assembly LH and check that it operates as specified.

OK:

Tester Connection

Specified Condition

Auxiliary battery positive (+) - u3-2 (+)

Auxiliary battery negative (-) - u3-1 (-)

Lock

Auxiliary battery positive (+) - u3-1 (-)

Auxiliary battery negative (-) - u3-2 (+)

Release

*a

Component without harness connected

(Parking Brake Actuator Assembly LH)

*b

Lock

*c

Release

(2) If the result is not as specified, replace the parking brake actuator assembly LH.

2. INSPECT PARKING BRAKE ACTUATOR ASSEMBLY RH

(a) Parking brake actuator assembly RH operation inspection

(1) Apply voltage to the terminals of the parking brake actuator assembly RH and check that it operates as specified.

OK:

Tester Connection

Specified Condition

Auxiliary battery positive (+) - u1-2 (+)

Auxiliary battery negative (-) - u1-1 (-)

Lock

Auxiliary battery positive (+) - u1-1 (-)

Auxiliary battery negative (-) - u1-2 (+)

Release

*a

Component without harness connected

(Parking Brake Actuator Assembly RH)

*b

Lock

*c

Release

(2) If the result is not as specified, replace the parking brake actuator assembly RH.