Brake

On-vehicle Inspection

~1min read

ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT PARKING BRAKE ACTUATOR ASSEMBLY

(a) With the ignition switch to ON and the wheels not contacting the ground, operate the electric parking brake switch (electric parking brake switch assembly) to check the condition of the rear wheels when the electric parking brake is operating and not operating.

OK:

Assembly Status

Condition of Rear Wheels

Lock

Rear wheels cannot be rotated

Release

Rear wheels can be rotated

(b) Pull the electric parking brake switch (electric parking brake switch assembly) to the lock side for approximately 1 second and check that the parking brake indicator light (red) turns on.

(c) Push the electric parking brake switch (electric parking brake switch assembly) to the release side for approximately 1 second and check that the parking brake indicator light (red) turns off.

(d) At this time, check that the brake warning light (yellow indicator) does not turn on.