Drivetrain

Installation

~1min read
010203040505.44N·mlb·ft
Tightening torque found on this page

INSTALLATION

COMPONENTS (INSTALLATION)

Procedure

Part Name Code

1

TRANSMISSION REVOLUTION SENSOR (NSS)

89413T

-

-

2

TCM

89535B

-

-

-

3

INSPECT FOR CONTINUOUSLY VARIABLE TRANSAXLE FLUID LEAK

-

-

-

4

CHECK DATA LIST

-

-

-

N*m (kgf*cm, ft.*lbf): Specified torque

●

Non-reusable part

Toyota Genuine CVT Fluid FE

-

-

PROCEDURE

1. INSTALL TRANSMISSION REVOLUTION SENSOR (NSS)

Toyota Genuine CVT fluid FE

-

-

(1) Coat a new O-ring with Toyota Genuine CVT fluid FE and install it to the transmission revolution sensor (NSS).

NOTICE:

Ensure that the O-ring is not twisted.

(2) Install the transmission revolution sensor (NSS) to the transaxle case sub-assembly with the bolt.

NOTICE:

Be careful not to damage the O-ring.

Torque:

5,4 N·m {55 kgf·cm, 48 in·lbf}

(3) Connect the transmission revolution sensor (NSS) connector.

2. INSTALL TCM

Click here

3. INSPECT FOR CONTINUOUSLY VARIABLE TRANSAXLE FLUID LEAK

Click here

4. CHECK DATA LIST

Click here