Suspension

Installation

~2min read
0408012016020010376N·mlb·ft
Tightening torque found on this page

INSTALLATION

COMPONENTS (INSTALLATION)

Procedure

Part Name Code

1

FRONT STABILIZER BAR BUSH LH

48815E

-

-

2

FRONT STABILIZER BAR BUSH RH

48815D

-

-

3

FRONT STABILIZER BAR

48811

-

-

4

FRONT NO. 1 STABILIZER BRACKET LH

48829A

-

-

5

FRONT NO. 1 STABILIZER BRACKET RH

48824A

-

-

6

FRONT STABILIZER LINK ASSEMBLY LH

48810

-

-

7

FRONT STABILIZER LINK ASSEMBLY RH

48820B

-

-

8

STEERING LINK ASSEMBLY

-

-

-

9

FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

51201F

-

-

-

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf)

●

Non-reusable part

PROCEDURE

1. INSTALL FRONT STABILIZER BAR BUSH LH

NOTICE:

  • Install the front stabilizer bar bushing LH so that the cutout is facing the rear of the vehicle.
  • Install the front stabilizer bar bushing LH onto the front stabilizer bar so that the stopper ring of the front stabilizer bar faces the outside of the vehicle.

*a

Cutout

*b

Stopper

Front of the Vehicle

Outside of the Vehicle

(1) Install the front stabilizer bar bushing LH to the front stabilizer bar as shown in the illustration.

2. INSTALL FRONT STABILIZER BAR BUSH RH

3. INSTALL FRONT STABILIZER BAR

NOTICE:

Make sure that the identification mark is positioned on the right side of the vehicle.

*a

Identification Mark

-

-

Front of the Vehicle

-

-

4. INSTALL FRONT NO. 1 STABILIZER BRACKET LH

*a

Arrow Mark

-

-

Front of the Vehicle

-

-

(1) Install the front No. 1 stabilizer bracket LH to the front suspension crossmember sub-assembly with the 2 bolts.

Torque:

103 N·m {1050 kgf·cm, 76 ft·lbf}

NOTICE:

  • Make sure to install the front No. 1 stabilizer bracket LH with its arrow facing the front of the vehicle.
  • Temporarily tighten the bolt (B) and then fully tighten the 2 bolts in the order of (A) and (B).

5. INSTALL FRONT NO. 1 STABILIZER BRACKET RH

6. INSTALL FRONT STABILIZER LINK ASSEMBLY LH

Click here

7. INSTALL FRONT STABILIZER LINK ASSEMBLY RH

8. INSTALL STEERING LINK ASSEMBLY

Click here

9. INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

Click here