Suspension

Removal

4steps
~24min
2/5difficulty
Done 0 of 4

REMOVAL

COMPONENTS (REMOVAL)

Procedure

Part Name Code

1

FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

51201F

-

-

-

2

STEERING LINK ASSEMBLY

-

-

-

3

FRONT STABILIZER LINK ASSEMBLY LH

48810

-

-

4

FRONT STABILIZER LINK ASSEMBLY RH

48820B

-

-

5

FRONT NO. 1 STABILIZER BRACKET LH

48829A

-

-

-

6

FRONT NO. 1 STABILIZER BRACKET RH

48824A

-

-

-

7

FRONT STABILIZER BAR

48811

-

-

-

8

FRONT STABILIZER BAR BUSH LH

48815E

-

-

-

9

FRONT STABILIZER BAR BUSH RH

48815D

-

-

-

●

Non-reusable part

-

-

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during front stabilizer bar removal/installation are shown below.

Necessary Procedures After Procedure Performed

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

Front wheel alignment adjustment

for HEV Model:
  1. Perform "Reset Memory"
  2. Perform "Calibration"
  • DTCs are stored
  • ABS warning light illuminates
  • Brake system warning light (yellow indicator) illuminates
  • Slip indicator light illuminates
  • Electronically controlled brake system does not operate correctly
for Gasoline Model:
  1. Perform "Reset Memory"
  2. Perform "Calibration"
  • DTCs are stored
  • ABS warning light illuminates
  • Slip indicator light illuminates
  • Electronically controlled brake system does not operate correctly
for Gasoline Model AWD:
  • Perform "Reset Memory"

Dynamic torque control AWD system

Suspension, tires, etc.

Rear television camera assembly optical axis (Back camera position setting)

Parking Assist Monitor System

Initialize headlight ECU subassembly LH

Automatic headlight beam level control system

PROCEDURE

1. REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

Click here

2. REMOVE STEERING LINK ASSEMBLY

Click here

3. REMOVE FRONT STABILIZER LINK ASSEMBLY LH

Click here

4. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

(a) Perform the same procedure as for the LH side.

5. REMOVE FRONT NO. 1 STABILIZER BRACKET LH

6. REMOVE FRONT NO. 1 STABILIZER BRACKET RH

(a) Perform the same procedure as for the LH side.

7. REMOVE FRONT STABILIZER BAR

8. REMOVE FRONT STABILIZER BAR BUSH LH

9. REMOVE FRONT STABILIZER BAR BUSH RH

(a) Perform the same procedure as for the LH side.